Ktebo tv anti-toppling quake belt clamp type no need to drill the top plate y-shaped two-point fixation to vesa screw hole adjustable length earthquake protection for rented houses with children and pets

Description

■ Tv for earthquake protection, the fixture that clamps the top plate Two vesa screw holes on the back and one clamp on the tabletop side are connected by a y-shaped belt to reduce the risk of tipping forward. This product is aimed at families that don't want to make holes for tv cabinets. ■ Confirm before purchase The effective aperture with a thick circular pad is up to about 33mm. Choose a thickness for the top that is larger than the opening, and make sure the shape of the edge and the insertion space on the back. Do not install the table where the curtain board or pillar will hit the hardware, and the glass top. The presence of vesa holes, the diameter of the screws and the required length can be clarified in the tv instructions. If there is no vesa hole, you can also use the adhesive base. ■ Set contents & materials 1 y-shaped belt body, 2 tv mounting brackets, 1 top plate fixing clamp, vesa screws (m4, m5, m6 and m8, 2 each), 2 spacers, 2 adhesive bases, 2 fixing nuts, 2 screws for wall fixing, 2 anchors. The belt is made of polyester, the brackets and clamps are made of metal, color black. The attached screws are short. The tv and stand are not included. ■ Installation flow 1. Unplug the power plug, check the hole on the back and the position of the 2. Fix the left and right brackets with vesa screws of the appropriate size with a screwdriver (if the holes are recessed, use spacers) 3. Insert the clamp deep into the edge of the ceiling and tighten the knob of the clamp by hand 4. Loosen the sag with the buckle, check each fixing ■ For mounting on the surface without vesa holes (adhesive base) Paste the adhesive base on a flat and smooth surface (such as the back of tv, furniture, wall) after wiping off the dirt and grease, then pass the screw shaft through the small hole at the bracket tip and fasten it with the fixing nut. The adhesive force depends on the material and condition of the surface to which it is applied and does not guarantee the holding capacity. Not work on wallpaper, sandy wall or uneven surface. After pasting, pull it by hand to check whether there is any lifting. ■ If you screw it to the wall The method of using screws and anchors to fix the wall will cause holes in the wall. Choose the method that suits the base and wall materials, and do not judge that it is suitable only by the accessories. ■ Frequently asked questions Q.. Can it be used for 33mm thick tops A. About 33mm is the upper limit of the effective aperture. If the thickness is the same as the aperture, there is no room for installation Q.. The type of accessory screw is A. 2 each of m4, m5, m6, and m8. Short screws, if you can't get it, please prepare your own screws designated for your equipment Q. for tv which have no vesa screw holes A. The included adhesive base is attached to the flat surface on the back and is fixed with a fastening nut through a small hole in the tip of the bracket. Holding power varies depending on the surface to which it is applied Q.. Do you need tools A. Hand tighten the ceiling side and use a screwdriver on the tv side Q.. Can it prevent rear end A. The structure is designed for forward-facing measures. Place the table near a wall and periodically check for looseness after use. It doesn't cover damage from earthquakes or accidents